Tile Shower Waterproofing Aqua Shield Waterproofing Membrane by the Square foot
New special offers are available!

Aqua Shield Waterproofing Membrane by the Square foot

Aqua Shield Waterproofing Membrane by the Square foot
blanke tile waterproofing membrane tile shower waterproofing membrane aqua shield membrane
SKU Aqua-SF
 
$0.00
Choose Sq Ft Here
Quantity

Blanke AQUA SHIELD is a waterproofing membrane that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on the membrane without the cure time required for liquid applied products. Blanke AQUA SHIELD provides a vapor barrier that makes it ideal for steam rooms. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization.

Application

Check substrate to ensure that it is dry, even and sound. Apply a setting adhesive suitable for the application to the wall or floor substrate with a 4 mm notched trowel. Apply the adhesive on an area approximately 3/8“ wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with a wall paper brush (tampico brush). Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4“ fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner.

This is Aqua Shield 100 by the square foot.  Aqua Shield is 3.28' wide.  To figure your square footage multiply the length by the width of the area you need to cover.   Aqua Shield can be installed using a 1/4" x 3/16" V-notched trowel.

Accessories

 We do not accept returns on cut orders.