Access Ramps & Wheelchair Ramps EZ Edge Rubber Threshold Ramps EZ Edge - Rubber Threshold Ramp - 1-1/4" Height
New special offers are available!

EZ Edge - Rubber Threshold Ramp - 1-1/4" Height

EZ Edge - Rubber Threshold Ramp - 1-1/4" Height
1-1/4" H x 14" L x 46" W Ramp 46" Wide Ramp CAD Drawing 1-1/4" H x 14" L x 82" W Ramp 82" Wide Ramp CAD Drawing
SKU RAEZ-ONEONEQUARTER-72
 
$0.00
Choose the Width of your Ramp
Choose the Color of your Ramp
Quantity

EZ Edge Rubber Threshold Ramp:

EZ Edge Rubber Threshold products are a safe and effective solution to almost every vertical rise barrier that will limit accessibility to those with disabilities.  SafePath Products are environmentally green, safe, and meet specific ADA (Americans with Disabilities Act) access code-compliant regulations.  These rubber transitions are easy to install and are a much less expensive solution compared to the alternatives.  Effectively eliminate trip hazards in door ways, step in showers, and any other obstacles where there are uneven surfaces.  Never again will you have to be contained or have limited accessibility due to a disability.  These rubber transitions offer a non-slip solution that can also establish immediate wheel chair access.

1-1/4" Height Ramp Options:

SafePath EZ Edge Ramps

Note:  1-1/4" height ramps come with a grid pattern as shown above.

All Rubber Threshold Ramps in the 1-1/4" height have a depth of 14". 

Ramps in the 1-1/4" height are available in 46" or 82" widths.

Choose Your Color - StoneCap Coating Color Selection:

The EZ Edge Rubber Threshold Ramps are manufactured in a black rubber finish.  You have the option to create an attractive, color fast, slip resistant surface.  StoneCap finishes typically take 7-10 days to ship.  All coating is done per order, which take some time to process and finish the StoneCap process.

Color Options: Nutmeg and Antique Bronze (Antique Bronze is black with bronze specs)

Easy Edge Rubber Threshold Ramp Installation:

Rubber Threshold Ramp Installation Guide.

1. Clean and dry the substrate.
2. Dry fit the ramp by placing it flush against the threshold
3. Use painter's tape to outline the ramp
4. Remove the ramp
5. Using a caulking gun, generously apply adhesive onto the substrate
6. Apply pressure to the "toe edge" and squeeze the adhesive out onto the tape
7. Place heavy objects on the ramp overnight, such as a sand bag
8. When adhesive is dry, cut off any excess adhesive with a utility knife
9. Then you remove your tape, and you're set!!

Please choose the Width of your EZ Edge Rubber Threshold Ramp from the drop down menu above.  All EZ Edge Rubber Threshold Ramps come in a black rubber finish, however additional colors are available.  Please select your Color option from the drop down menu above. All EZ Edge Rubber Threshold Ramps with a Width of over 46" will come in 2 pieces that will be glued down side by side for a seamless ramp.

Note:  Only ramps 1" and over in height will have a grid pattern.  All other ramps will come without a grid pattern.