Tile Shower Waterproofing Aqua Shield - Tile Shower Waterproofing Membrane - 110 sq ft roll
New special offers are available!

Aqua Shield - Tile Shower Waterproofing Membrane - 110 sq ft roll

Aqua Shield - Tile Shower Waterproofing Membrane - 110 sq ft roll
Membrane CAD Drawing Install using a modified thinset mortar Easy to work with, easy installation.
SKU AQUA-110-09
Select AquaShield Here

Blanke AQUA SHIELD is a waterproofing shower membrane that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on the membrane without the cure time required for liquid applied products. Blanke AQUA SHIELD provides a vapor barrier that makes it ideal for steam rooms. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization.


Check substrate to ensure that it is dry, even and sound. Apply a setting adhesive suitable for the application to the wall or floor substrate with a 4 mm notched trowel. Apply the adhesive on an area approximately 3/8“ wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with a wall paper brush (tampico brush). Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4“ fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner.

This is Aqua Shield Tile Shower Waterproofing Membrane 110 sq ft roll or 3.28' x 33' 6".   Aqua Shield can be installed using a 1/4" x 3/16" V-notched trowel.