Tile Redi® - Shower Pans Redi Poxy - Epoxy Adhesive
New special offers are available!

Redi Poxy - Epoxy Adhesive

Redi Poxy - Epoxy Adhesive
Redi Poxy 12 lb Set
SKU REDI-CRETE-72
 
$0.00
Redi Poxy
Quantity

Redi Poxy Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. Redi Poxy can be used in both Tile Redi® Shower Pan and Redi® Niche installations.  In fact, each Tile Redi® shower pan comes with enough Redi Poxy to cover the entire pan.  However, Redi Poxy is NOT included with the purchase of a Redi® Niche.  If you would like to use the Redi Poxy on your Redi® Niche, or you need some extra for your shower pan, we have the 3-part mix in stock and ready to ship.

Redi Poxy can be applied directly to the Tile Redi® Shower Pan and Redi® Niche surface, and is then ready to be tiled immediately!

Packaging

Redi Poxy consists of 1 pouch of Part A (Resin), 1 pouch of Part B (Hardener), and 1 bag of Part C (Filler) Powder and come in three different sizes; 6lbs, 9lbs & 12lbs.

Mixing

Pour the Redi Poxy Adhesive Part A and Part B into a clean mixing pail and mix thoroughly. Add Part C Filler Powder and mix to a smooth, trowelable consistency. Adhesive is ready for use immediately after mixing.

Application

Apply Redi Poxy adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional mortar with the notched side.

Approximate Coverage
1/8" Square notched trowel - 45-55 sq. ft. of coverage (based of 12 lb. set). 
1/4" Square notched trowel - 15-18 sq. ft. of coverage 
(based of 12 lb. set)

In addition to being used in conjunction with Tile Redi® Shower Pans and Redi® Niches, Redi Poxy can be used on a variety of substrates. Here is a list of suitable substrates:

  • Concrete
  • Ceramic tile and stones
  • Exterior glue plywood
  • Concrete masonry
  • Brick masonry
  • Non-water soluble cut-back adhesive
  • Vinyl or other resilient tile
  • Cement mortar beds
  • Gypsum wallboard
  • Cement plaster
  • Cement terrazzo
  • Plastic laminate
  • Cement backer board
  • Steel

Redi Poxy has been tested and meets or exceeds the bonding requirements established by the Tile Council of North America, Inc.

Please select what size Redi Poxy you would like with the drop down menu above.