Free Shipping on Orders Over $500

Stonetech Tile Cleaner and Tile Sealer

StoneTech® Professional stone, tile, and masonry care products are the industry's #1 solution to protect and preserve tile and stone against the damaging effects of everyday living. Laticrete features a complete line of products to protect, clean, and transform tile and stone surfaces such as floors and countertops, and Tileprotection.com is proud to be able to offer such an extensive and effective line of tile cleaners and tile sealers.

Cleaning tile, sealing tile, and protecting tile has never been easier or as effective. Laticrete has solidified itself as the go to company for stone and tile protection. We know how proud homeowners are to get the floors and countertops of their dreams, and we want to ensure the beauty of these natural stone and tile surfaces for years to come.  

Tile Cleaners and Sealers

Sort by:
{"id":1181130948650,"title":"StoneTech® Professional Enhancer Pro™ Sealer","handle":"stonetech®-professional-enhancer-pro™-sealer","description":"\u003cp\u003eStoneTech® Professional Enhancer Pro Sealer enriches the color of your natural stone and provides heavy duty protection against most stains. Enhancer Pro is a solvent-based sealer that can be used in both interior and exterior applications. However, it is meant to be used for professional use only. Enhancer Pro can be used on natural stone such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone, and textured stone, as well as masonry and concrete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, free of waxes, coatings, and previous sealers, and is dry for 24–72 hours. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask off any surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eLiberally apply an even coat using a paint pad, roller, brush, or pump-up garden sprayer. Do not use a power sprayer, towel, or sponge for application. Do not thin before using. See Method of Application for more instructions.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to penetrate surface for 15–20 minutes. Denser material may require more time to penetrate. \u003cstrong\u003eDO NOT ALLOW EXCESS SEALER TO DRY ON SURFACE.\u003c\/strong\u003e Failure to remove excess sealer from surface may result in residue that may need to be mechanically removed.\u003c\/li\u003e\n\u003cli\u003eThoroughly wipe surface with multiple dry cloths to remove all excess sealer.\u003c\/li\u003e\n\u003cli\u003eA second coat may be needed for more absorbent surfaces. If darker appearance is required, sealer should be applied one hour after initial application, as directed in steps 2–4.\u003c\/li\u003e\n\u003cli\u003eFull cure is achieved after 24–72 hours. Avoid foot traffic for 6–8 hours after application. If foot traffic must resume sooner, cover the floor with red rosin paper to protect it until full cure has been achieved. Red rosin paper is not needed to apply second coat.\u003c\/li\u003e\n\u003cli\u003eClean equipment with mineral spirits. Rags and equipment that are wet with product may be flammable. Clean up promptly after job is complete. Clean equipment with mineral spirits and allow to dry in a well-ventilated area. Allow rags to dry in a well-ventilated area out of reach of children and pets. When dry, dispose of in accordance with local waste disposal regulations.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMethod of Application: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor small jobs, use a paint pad, roller, or brush. For larger jobs, use a pump-up garden sprayer available at your local garden center, hardware store, or home improvement center. Do not use a power sprayer. Power sprayers create a significant amount of overspray, resulting in wasted product and the need for additional clean-up. A pump-up garden sprayer will reduce the potential for over-exposure to vapors and produce better results.\u003c\/p\u003e\n\u003cp\u003eEnsure that the area is well-ventilated during application and until the surface is dry to the touch. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 115 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eFor professional use only. For an easier-to-use, water-based technology, we recommend Enhancer.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-02-23T14:48:31-06:00","created_at":"2018-02-06T12:51:15-06:00","vendor":"Laticrete","type":"Transform","tags":["Transform"],"price":6492,"price_min":6492,"price_max":6492,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11331025403946,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAT-ENHANCER-PRO-QT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191811964970,"product_id":1181130948650,"position":1,"created_at":"2018-02-06T12:51:15-06:00","updated_at":"2018-02-06T12:51:15-06:00","alt":null,"width":1500,"height":1500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/Enhancer_Pro_Quart.jpg?v=1517943075","variant_ids":[11331025403946]},"available":true,"name":"StoneTech® Professional Enhancer Pro™ Sealer","public_title":null,"options":["Default Title"],"price":6492,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/Enhancer_Pro_Quart.jpg?v=1517943075"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/Enhancer_Pro_Quart.jpg?v=1517943075","options":["Title"],"content":"\u003cp\u003eStoneTech® Professional Enhancer Pro Sealer enriches the color of your natural stone and provides heavy duty protection against most stains. Enhancer Pro is a solvent-based sealer that can be used in both interior and exterior applications. However, it is meant to be used for professional use only. Enhancer Pro can be used on natural stone such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone, and textured stone, as well as masonry and concrete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, free of waxes, coatings, and previous sealers, and is dry for 24–72 hours. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask off any surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eLiberally apply an even coat using a paint pad, roller, brush, or pump-up garden sprayer. Do not use a power sprayer, towel, or sponge for application. Do not thin before using. See Method of Application for more instructions.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to penetrate surface for 15–20 minutes. Denser material may require more time to penetrate. \u003cstrong\u003eDO NOT ALLOW EXCESS SEALER TO DRY ON SURFACE.\u003c\/strong\u003e Failure to remove excess sealer from surface may result in residue that may need to be mechanically removed.\u003c\/li\u003e\n\u003cli\u003eThoroughly wipe surface with multiple dry cloths to remove all excess sealer.\u003c\/li\u003e\n\u003cli\u003eA second coat may be needed for more absorbent surfaces. If darker appearance is required, sealer should be applied one hour after initial application, as directed in steps 2–4.\u003c\/li\u003e\n\u003cli\u003eFull cure is achieved after 24–72 hours. Avoid foot traffic for 6–8 hours after application. If foot traffic must resume sooner, cover the floor with red rosin paper to protect it until full cure has been achieved. Red rosin paper is not needed to apply second coat.\u003c\/li\u003e\n\u003cli\u003eClean equipment with mineral spirits. Rags and equipment that are wet with product may be flammable. Clean up promptly after job is complete. Clean equipment with mineral spirits and allow to dry in a well-ventilated area. Allow rags to dry in a well-ventilated area out of reach of children and pets. When dry, dispose of in accordance with local waste disposal regulations.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMethod of Application: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor small jobs, use a paint pad, roller, or brush. For larger jobs, use a pump-up garden sprayer available at your local garden center, hardware store, or home improvement center. Do not use a power sprayer. Power sprayers create a significant amount of overspray, resulting in wasted product and the need for additional clean-up. A pump-up garden sprayer will reduce the potential for over-exposure to vapors and produce better results.\u003c\/p\u003e\n\u003cp\u003eEnsure that the area is well-ventilated during application and until the surface is dry to the touch. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 115 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eFor professional use only. For an easier-to-use, water-based technology, we recommend Enhancer.\u003c\/span\u003e\u003c\/p\u003e"}
StoneTech® Professional Enhancer Pro™ Sealer

StoneTech® Professional Enhancer Pro™ Sealer

$64.92

StoneTech® Professional Enhancer Pro Sealer enriches the color of your natural stone and provides heavy duty protection against most stains. Enhancer Pro is a solvent-based sealer that can be used in both interior and exterior applications. However, it is meant to be used for professional use only. Enhancer Pro can be used on natural stone such ...


More Info
{"id":1181131571242,"title":"StoneTech® Professional Revitalizer® 24oz Spray Bottle","handle":"stonetech®-professional-revitalizer®-24oz-spray-bottle","description":"\u003cp\u003eStoneTech® Professional Revitalizer® Cleaner and Protector is the most recognized and best stone and tile cleaner in the industry. The Revitalizer cleans common messes while reinforcing protection at the same time. This cleaner has a built-in sealer that will make any surface, whether it be a floor, countertop, or shower, easier to clean. This gentle formula is ready to use and is highly recommended for use on natural stone such as granite, slate, and sandstone. Available in Citrus or Cucumber scent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Keep children and pets out of the area during application and drying.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the scent of StoneTech® Professional Revitalizer® Cleaner you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-02-23T14:45:03-06:00","created_at":"2018-02-06T12:51:27-06:00","vendor":"Laticrete","type":"Clean","tags":["Clean"],"price":1399,"price_min":1399,"price_max":1399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11331032711210,"title":"Citrus","option1":"Citrus","option2":null,"option3":null,"sku":"LAT-REVITALIZER-CIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"StoneTech® Professional Revitalizer® 24oz Spray Bottle - Citrus","public_title":"Citrus","options":["Citrus"],"price":1399,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null},{"id":12929196425258,"title":"Cucumber","option1":"Cucumber","option2":null,"option3":null,"sku":"LAT-REVITALIZER-CUC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"StoneTech® Professional Revitalizer® 24oz Spray Bottle - Cucumber","public_title":"Cucumber","options":["Cucumber"],"price":1399,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/revitalizer24-500.jpg?v=1517943087"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/revitalizer24-500.jpg?v=1517943087","options":["Scent"],"content":"\u003cp\u003eStoneTech® Professional Revitalizer® Cleaner and Protector is the most recognized and best stone and tile cleaner in the industry. The Revitalizer cleans common messes while reinforcing protection at the same time. This cleaner has a built-in sealer that will make any surface, whether it be a floor, countertop, or shower, easier to clean. This gentle formula is ready to use and is highly recommended for use on natural stone such as granite, slate, and sandstone. Available in Citrus or Cucumber scent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Keep children and pets out of the area during application and drying.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the scent of StoneTech® Professional Revitalizer® Cleaner you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e"}
StoneTech® Professional Revitalizer® 24oz Spray Bottle

StoneTech® Professional Revitalizer® 24oz Spray Bottle

$13.99

StoneTech® Professional Revitalizer® Cleaner and Protector is the most recognized and best stone and tile cleaner in the industry. The Revitalizer cleans common messes while reinforcing protection at the same time. This cleaner has a built-in sealer that will make any surface, whether it be a floor, countertop, or shower, easier to clean. This g...


More Info
{"id":1181131407402,"title":"StoneTech® Professional Heavy Duty Coating Stripper","handle":"stonetech®-professional-heavy-duty-coating-stripper","description":"\u003cp\u003eStoneTech® Professional Heavy Duty Coating Stripper removes even the toughest coatings, lacquers, varnishes, and epoxy grout haze from stone and masonry. This coating stripper is a low odor and non-flammable cleaner. This water-based formula is extremely easy to use and will allow you to transform the look and finish of your stone and masonry. StoneTech Coating Stripper is suitable for use on all natural stone surfaces including slate, marble, and saltillo. However, it is not intended for use on surfaces other than stone and masonry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area until foot traffic resumes. Avoid contact with surfaces not intended to be treated. Product can cause plastics (e.g., PET) to haze, and can dull linoleum surfaces. Avoid applying in direct sunlight. Should not be used in extreme temperatures. Recommended application temperature range is 50°F to 90°F.\u003c\/p\u003e\n\u003cp\u003e1. Shake well before using. Do not dilute before applying.\u003cbr\u003e2. Wear rubber gloves and eye protection during handling and application to prevent skin and eye contact.\u003cbr\u003e3. Liberally apply an even coat over the required area with a paint brush, mop or paint pad. Do not apply product with a sprayer. Apply a second coat 10 minutes after the first coat to even out the thickness of the application. Immediately remove product from unintended surfaces with a wet cloth to prevent potential damage to those surfaces.\u003cbr\u003e4. Application times will vary depending on type of coating being removed. The following are approximate application times:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/files\/HD_Coating_Stripper_Time_chart_large.jpg?v=1519418382\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e5. Do not let Heavy Duty Coating Stripper dry on the surface. If product starts to dry, add water to keep surface wet. \u003cbr\u003e6. Agitate surface with a nylon scrub brush or pad after testing a small area first to make sure that brush or pad will not scratch stone. Surface can be wet with water to enable easier removal of coating. \u003cbr\u003e7. Wipe up residual coating with clean, dry cloths. \u003cbr\u003e8. Rinse surface well with clean water. \u003cbr\u003e9. More than one application may be required; repeat steps 3 through 8 when necessary. \u003cbr\u003e10. Surface traffic may begin 2 hours after removal of coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 50 square feet.\u003c\/p\u003e","published_at":"2018-04-11T10:13:35-05:00","created_at":"2018-02-06T12:51:24-06:00","vendor":"Laticrete","type":"Clean","tags":["Clean"],"price":3458,"price_min":3458,"price_max":3458,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11331031859242,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAT-STRIPPER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"StoneTech® Professional Heavy Duty Coating Stripper","public_title":null,"options":["Default Title"],"price":3458,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/20170124_130240.jpg?v=1517943084"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/20170124_130240.jpg?v=1517943084","options":["Title"],"content":"\u003cp\u003eStoneTech® Professional Heavy Duty Coating Stripper removes even the toughest coatings, lacquers, varnishes, and epoxy grout haze from stone and masonry. This coating stripper is a low odor and non-flammable cleaner. This water-based formula is extremely easy to use and will allow you to transform the look and finish of your stone and masonry. StoneTech Coating Stripper is suitable for use on all natural stone surfaces including slate, marble, and saltillo. However, it is not intended for use on surfaces other than stone and masonry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area until foot traffic resumes. Avoid contact with surfaces not intended to be treated. Product can cause plastics (e.g., PET) to haze, and can dull linoleum surfaces. Avoid applying in direct sunlight. Should not be used in extreme temperatures. Recommended application temperature range is 50°F to 90°F.\u003c\/p\u003e\n\u003cp\u003e1. Shake well before using. Do not dilute before applying.\u003cbr\u003e2. Wear rubber gloves and eye protection during handling and application to prevent skin and eye contact.\u003cbr\u003e3. Liberally apply an even coat over the required area with a paint brush, mop or paint pad. Do not apply product with a sprayer. Apply a second coat 10 minutes after the first coat to even out the thickness of the application. Immediately remove product from unintended surfaces with a wet cloth to prevent potential damage to those surfaces.\u003cbr\u003e4. Application times will vary depending on type of coating being removed. The following are approximate application times:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/files\/HD_Coating_Stripper_Time_chart_large.jpg?v=1519418382\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e5. Do not let Heavy Duty Coating Stripper dry on the surface. If product starts to dry, add water to keep surface wet. \u003cbr\u003e6. Agitate surface with a nylon scrub brush or pad after testing a small area first to make sure that brush or pad will not scratch stone. Surface can be wet with water to enable easier removal of coating. \u003cbr\u003e7. Wipe up residual coating with clean, dry cloths. \u003cbr\u003e8. Rinse surface well with clean water. \u003cbr\u003e9. More than one application may be required; repeat steps 3 through 8 when necessary. \u003cbr\u003e10. Surface traffic may begin 2 hours after removal of coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 50 square feet.\u003c\/p\u003e"}
StoneTech® Professional Heavy Duty Coating Stripper

StoneTech® Professional Heavy Duty Coating Stripper

$34.58

StoneTech® Professional Heavy Duty Coating Stripper removes even the toughest coatings, lacquers, varnishes, and epoxy grout haze from stone and masonry. This coating stripper is a low odor and non-flammable cleaner. This water-based formula is extremely easy to use and will allow you to transform the look and finish of your stone and masonry. S...


More Info
{"id":1181131210794,"title":"StoneTech® Professional Restore™ Acidic Cleaner","handle":"stonetech®-professional-restore™-acidic-cleaner","description":"\u003cp\u003eStoneTech® Professional Restore™ Acidic Cleaner cleans away hard water deposits, grout haze, efflorescence, and soap scum. It is ideal for use for in tile showers as well as on tile and stone floors and countertops. The Restore Cleaner will renew your tile and grout, giving it the appearance of being brand new. Restore is a professional grade acidic cleaner that is suitable for use on ceramic tile, porcelain tile \u0026amp; grout, granite, slate, and sandstone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Test in small inconspicuous area to determine required dilution and results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Heavy duty dilution may darken some surfaces. This acid-based cleaner will etch or damage most marble, limestone and travertine surfaces. Will etch or corrode most metal surfaces. Avoid skin and eye contact. Wear protective eyewear, gloves, long sleeves, and long pants while handling product. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.\u003c\/p\u003e\n\u003cp\u003eDilute concentrated cleaner with warm water according to the following mixing chart:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/files\/acidic_cleaner_dilution_chart_large.jpg?v=1519417963\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply mixed solution with a clean mop, towel, sponge or sprayer. Avoid applying cleaner on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eLightly rub with a scrub brush or floor machine as needed.\u003c\/li\u003e\n\u003cli\u003eRemove solution using a sponge, wet\/dry vacuum or damp mop.\u003c\/li\u003e\n\u003cli\u003eRinse area well with clean water and wipe dry. Thoroughly rinse all metal surfaces with clean water.\u003c\/li\u003e\n\u003cli\u003eReseal cleaned area with a DuPont™ StoneTech® Professional sealer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart Concentrate - Up to 2,500 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note that this is a concentrate.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-02-23T14:36:08-06:00","created_at":"2018-02-06T12:51:20-06:00","vendor":"Laticrete","type":"Clean","tags":["Clean"],"price":1173,"price_min":1173,"price_max":1173,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11331031334954,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAT-RESTORE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"StoneTech® Professional Restore™ Acidic Cleaner","public_title":null,"options":["Default Title"],"price":1173,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/Restore_Quart.jpg?v=1517943080"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/Restore_Quart.jpg?v=1517943080","options":["Title"],"content":"\u003cp\u003eStoneTech® Professional Restore™ Acidic Cleaner cleans away hard water deposits, grout haze, efflorescence, and soap scum. It is ideal for use for in tile showers as well as on tile and stone floors and countertops. The Restore Cleaner will renew your tile and grout, giving it the appearance of being brand new. Restore is a professional grade acidic cleaner that is suitable for use on ceramic tile, porcelain tile \u0026amp; grout, granite, slate, and sandstone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Test in small inconspicuous area to determine required dilution and results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Heavy duty dilution may darken some surfaces. This acid-based cleaner will etch or damage most marble, limestone and travertine surfaces. Will etch or corrode most metal surfaces. Avoid skin and eye contact. Wear protective eyewear, gloves, long sleeves, and long pants while handling product. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.\u003c\/p\u003e\n\u003cp\u003eDilute concentrated cleaner with warm water according to the following mixing chart:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/files\/acidic_cleaner_dilution_chart_large.jpg?v=1519417963\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply mixed solution with a clean mop, towel, sponge or sprayer. Avoid applying cleaner on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eLightly rub with a scrub brush or floor machine as needed.\u003c\/li\u003e\n\u003cli\u003eRemove solution using a sponge, wet\/dry vacuum or damp mop.\u003c\/li\u003e\n\u003cli\u003eRinse area well with clean water and wipe dry. Thoroughly rinse all metal surfaces with clean water.\u003c\/li\u003e\n\u003cli\u003eReseal cleaned area with a DuPont™ StoneTech® Professional sealer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart Concentrate - Up to 2,500 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note that this is a concentrate.\u003c\/span\u003e\u003c\/p\u003e"}
StoneTech® Professional Restore™ Acidic Cleaner

StoneTech® Professional Restore™ Acidic Cleaner

$11.73

StoneTech® Professional Restore™ Acidic Cleaner cleans away hard water deposits, grout haze, efflorescence, and soap scum. It is ideal for use for in tile showers as well as on tile and stone floors and countertops. The Restore Cleaner will renew your tile and grout, giving it the appearance of being brand new. Restore is a professional grade ac...


More Info
{"id":1181131276330,"title":"StoneTech® KlenzAll™ Cleaner","handle":"stonetech®-klenzall™-cleaner","description":"\u003cp\u003eStoneTech® Professional KlenzAll™ Cleaner powers through stubborn grease, soils, spills, and stains. This product is safe to use on stone, and will not etch whatsoever. KlenzAll™ Cleaner is made from an alkaline formula, giving it professional strength to get through just about any stain. It can be used on natural stone such as marble, granite, limestone, travertine, slate, sandstone, ceramic and porcelain tile and grout, as well as masonry and concrete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Test in small inconspicuous area to determine required dilution and results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Avoid skin and eye contact with product. Wear protective eyewear, gloves, long sleeves, and long pants while handling concentrate. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.\u003c\/p\u003e\n\u003cp\u003eDilute concentrated cleaner with warm water according to the following mixing chart (24oz spray bottle is ready-to-use and does not need to be diluted):\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1683\/4765\/files\/klenzall_mix_chart_large.jpg?v=1493838689\" alt=\"Mixing Chart\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply mixed solution with a mop, sponge or sprayer. Avoid applying cleaner on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eLightly rub with a scrub brush or floor machine as needed.\u003c\/li\u003e\n\u003cli\u003eRemove solution using a sponge, wet\/dry vacuum or damp mop.\u003c\/li\u003e\n\u003cli\u003eRinse area well with clean water.\u003c\/li\u003e\n\u003cli\u003eReseal cleaned area with a StoneTech® Professional sealer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e24 oz Spray Bottle (ready-to-use) - Information not available\u003c\/p\u003e\n\u003cp\u003eQuart (concentrate) - Up to 4,000 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional KlenzAll™ Cleaner you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-02-23T13:46:15-06:00","created_at":"2018-02-06T12:51:22-06:00","vendor":"Laticrete","type":"Clean","tags":["Clean"],"price":1078,"price_min":1078,"price_max":1178,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11331031531562,"title":"24 oz Spray","option1":"24 oz Spray","option2":null,"option3":null,"sku":"LAT-KLENZALL-24OZ","requires_shipping":true,"taxable":true,"featured_image":{"id":3191813210154,"product_id":1181131276330,"position":2,"created_at":"2018-02-06T12:51:22-06:00","updated_at":"2018-02-06T12:51:22-06:00","alt":null,"width":550,"height":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/klenzall_spray.jpg?v=1517943082","variant_ids":[11331031531562]},"available":true,"name":"StoneTech® KlenzAll™ Cleaner - 24 oz Spray","public_title":"24 oz Spray","options":["24 oz Spray"],"price":1078,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null},{"id":12929186267178,"title":"Quart Bottle","option1":"Quart Bottle","option2":null,"option3":null,"sku":"LAT-KLENZALL-QT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191813144618,"product_id":1181131276330,"position":1,"created_at":"2018-02-06T12:51:22-06:00","updated_at":"2018-02-06T12:51:22-06:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/klenzallQT.jpg?v=1517943082","variant_ids":[12929186267178]},"available":true,"name":"StoneTech® KlenzAll™ Cleaner - Quart Bottle","public_title":"Quart Bottle","options":["Quart Bottle"],"price":1178,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/klenzallQT.jpg?v=1517943082","\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/klenzall_spray.jpg?v=1517943082"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/klenzallQT.jpg?v=1517943082","options":["Size"],"content":"\u003cp\u003eStoneTech® Professional KlenzAll™ Cleaner powers through stubborn grease, soils, spills, and stains. This product is safe to use on stone, and will not etch whatsoever. KlenzAll™ Cleaner is made from an alkaline formula, giving it professional strength to get through just about any stain. It can be used on natural stone such as marble, granite, limestone, travertine, slate, sandstone, ceramic and porcelain tile and grout, as well as masonry and concrete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Test in small inconspicuous area to determine required dilution and results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Avoid skin and eye contact with product. Wear protective eyewear, gloves, long sleeves, and long pants while handling concentrate. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.\u003c\/p\u003e\n\u003cp\u003eDilute concentrated cleaner with warm water according to the following mixing chart (24oz spray bottle is ready-to-use and does not need to be diluted):\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1683\/4765\/files\/klenzall_mix_chart_large.jpg?v=1493838689\" alt=\"Mixing Chart\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply mixed solution with a mop, sponge or sprayer. Avoid applying cleaner on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eLightly rub with a scrub brush or floor machine as needed.\u003c\/li\u003e\n\u003cli\u003eRemove solution using a sponge, wet\/dry vacuum or damp mop.\u003c\/li\u003e\n\u003cli\u003eRinse area well with clean water.\u003c\/li\u003e\n\u003cli\u003eReseal cleaned area with a StoneTech® Professional sealer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e24 oz Spray Bottle (ready-to-use) - Information not available\u003c\/p\u003e\n\u003cp\u003eQuart (concentrate) - Up to 4,000 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional KlenzAll™ Cleaner you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e"}
StoneTech® KlenzAll™ Cleaner

StoneTech® KlenzAll™ Cleaner

$10.78

StoneTech® Professional KlenzAll™ Cleaner powers through stubborn grease, soils, spills, and stains. This product is safe to use on stone, and will not etch whatsoever. KlenzAll™ Cleaner is made from an alkaline formula, giving it professional strength to get through just about any stain. It can be used on natural stone such as marble, granite, ...


More Info
{"id":1181131079722,"title":"StoneTech® Professional Oil Stain Remover","handle":"stonetech®-professional-oil-stain-remover","description":"\u003cp\u003eStoneTech® Professional Oil Stain Remover pulls out deep oil stains on natural stone, ceramic tile, concrete, and more. The remover leaves no residue behind, eliminating any streaking or need for clean up. In addition, it will not discolor your stone or tile, and is extremely easy to use. Feel free to use the Oil Stain Remover generously on any natural stone such as marble, granite, limestone, travertine, slate, and sandstone, grout for ceramic and porcelain tile, or masonry and concrete as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area to determine that the desired results will be achieved. Make sure surface is clean, dry, and free of waxes and coatings. Ensure that area is well-ventilated and keep children and pets away from the area during application and until surface is clean and dry.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUsing a plastic or wood spatula, stir thoroughly to mix the paste.\u003c\/li\u003e\n\u003cli\u003eApply a 1\/4” thick layer of paste to the stain. Ensure that the paste extends at least 1–2” beyond the edge of the stain.\u003c\/li\u003e\n\u003cli\u003eDo not cover.\u003c\/li\u003e\n\u003cli\u003eAllow 48–72 hours for paste to completely dry to a powder.\u003c\/li\u003e\n\u003cli\u003eRemove powder and discard.\u003c\/li\u003e\n\u003cli\u003eAllow solvent to completely dry from the stone.\u003c\/li\u003e\n\u003cli\u003eIf stain is not completely gone after drying, repeat process.\u003c\/li\u003e\n\u003cli\u003eClean up residue and tools with mineral spirits.\u003c\/li\u003e\n\u003cli\u003eReseal cleaned area.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3 ounce Can - Up to 28 square inches of surface at 1\/4\" thickness\u003c\/p\u003e\n\u003cp\u003ePint Can - Up to 1 square foot of surface at 1\/4\" thickness\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional Oil Stain Remover you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-02-23T13:40:50-06:00","created_at":"2018-02-06T12:51:17-06:00","vendor":"Laticrete","type":"Clean","tags":["Clean"],"price":899,"price_min":899,"price_max":1999,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13937783144490,"title":"3oz Can","option1":"3oz Can","option2":null,"option3":null,"sku":"LAT-3OZ-OIL","requires_shipping":true,"taxable":true,"featured_image":{"id":3191812161578,"product_id":1181131079722,"position":1,"created_at":"2018-02-06T12:51:17-06:00","updated_at":"2018-02-06T12:51:17-06:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/3oz_Oil_Stain_Remover.jpg?v=1517943077","variant_ids":[13937783144490]},"available":true,"name":"StoneTech® Professional Oil Stain Remover - 3oz Can","public_title":"3oz Can","options":["3oz Can"],"price":899,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""},{"id":11331026321450,"title":"Pint Can","option1":"Pint Can","option2":null,"option3":null,"sku":"LAT-OIL-STAIN-PT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191812194346,"product_id":1181131079722,"position":2,"created_at":"2018-02-06T12:51:17-06:00","updated_at":"2018-02-06T12:51:17-06:00","alt":null,"width":1600,"height":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/ST_Oil_Stain_Pint.jpg?v=1517943077","variant_ids":[11331026321450]},"available":true,"name":"StoneTech® Professional Oil Stain Remover - Pint Can","public_title":"Pint Can","options":["Pint Can"],"price":1999,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/3oz_Oil_Stain_Remover.jpg?v=1517943077","\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/ST_Oil_Stain_Pint.jpg?v=1517943077"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/3oz_Oil_Stain_Remover.jpg?v=1517943077","options":["Size"],"content":"\u003cp\u003eStoneTech® Professional Oil Stain Remover pulls out deep oil stains on natural stone, ceramic tile, concrete, and more. The remover leaves no residue behind, eliminating any streaking or need for clean up. In addition, it will not discolor your stone or tile, and is extremely easy to use. Feel free to use the Oil Stain Remover generously on any natural stone such as marble, granite, limestone, travertine, slate, and sandstone, grout for ceramic and porcelain tile, or masonry and concrete as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area to determine that the desired results will be achieved. Make sure surface is clean, dry, and free of waxes and coatings. Ensure that area is well-ventilated and keep children and pets away from the area during application and until surface is clean and dry.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUsing a plastic or wood spatula, stir thoroughly to mix the paste.\u003c\/li\u003e\n\u003cli\u003eApply a 1\/4” thick layer of paste to the stain. Ensure that the paste extends at least 1–2” beyond the edge of the stain.\u003c\/li\u003e\n\u003cli\u003eDo not cover.\u003c\/li\u003e\n\u003cli\u003eAllow 48–72 hours for paste to completely dry to a powder.\u003c\/li\u003e\n\u003cli\u003eRemove powder and discard.\u003c\/li\u003e\n\u003cli\u003eAllow solvent to completely dry from the stone.\u003c\/li\u003e\n\u003cli\u003eIf stain is not completely gone after drying, repeat process.\u003c\/li\u003e\n\u003cli\u003eClean up residue and tools with mineral spirits.\u003c\/li\u003e\n\u003cli\u003eReseal cleaned area.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3 ounce Can - Up to 28 square inches of surface at 1\/4\" thickness\u003c\/p\u003e\n\u003cp\u003ePint Can - Up to 1 square foot of surface at 1\/4\" thickness\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional Oil Stain Remover you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e"}
StoneTech® Professional Oil Stain Remover

StoneTech® Professional Oil Stain Remover

$8.99

StoneTech® Professional Oil Stain Remover pulls out deep oil stains on natural stone, ceramic tile, concrete, and more. The remover leaves no residue behind, eliminating any streaking or need for clean up. In addition, it will not discolor your stone or tile, and is extremely easy to use. Feel free to use the Oil Stain Remover generously on any ...


More Info
{"id":1181131538474,"title":"StoneTech® Professional Stone \u0026 Tile Cleaner","handle":"stonetech®-professional-stone-tile-cleaner","description":"\u003cp\u003eStoneTech® Professional Stone \u0026amp; Tile Cleaner will leave your stone and tile looking shiny and new. This neutral, gentle cleaning formula is perfect for cleaning everyday messes. Spills, dirt, and pets are no match for the Stone \u0026amp; Tile Cleaner. Perfect for countertops and floors, or wherever else you may have stone and ceramic tile. It is suitable to use on natural stone such as marble, granite, limestone, travertine, slate, sandstone, and Zodiaq, as well as on ceramic tile, porcelain tile, and grout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Be sure surfaces to be cleaned are swept or vacuumed to remove loose debris. Avoid skin and eye contact with product. Wear protective eyewear and gloves when handling concentrate. Keep children and pets out of the area during application and drying.\u003c\/p\u003e\n\u003cp\u003eDilute concentrated cleaner with warm water according to the following mixing chart:\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"Mixing Chart\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1683\/4765\/files\/mixing_chart_grande.jpg?v=1493753215\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eOne gallon of concentrate makes up to 64 gallons of cleaning solution.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply mixed solution with a damp mop, sponge or appropriate professional cleaning equipment.\u003c\/li\u003e\n\u003cli\u003eClean entire area with mop, changing mop water often to ensure that soil is not redeposited. Wipe or rinse cleaned area.\u003c\/li\u003e\n\u003cli\u003eLet area dry completely before using.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart Concentrate - Up to 7,500 square feet per gallon. One quart makes 16 gallons.\u003c\/p\u003e","published_at":"2018-02-23T13:27:46-06:00","created_at":"2018-02-06T12:51:26-06:00","vendor":"Laticrete","type":"Clean","tags":["Clean"],"price":1047,"price_min":1047,"price_max":1047,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11331032580138,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAT-CLEANER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"StoneTech® Professional Stone \u0026 Tile Cleaner","public_title":null,"options":["Default Title"],"price":1047,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/20170124_130151.jpg?v=1517943086"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/20170124_130151.jpg?v=1517943086","options":["Title"],"content":"\u003cp\u003eStoneTech® Professional Stone \u0026amp; Tile Cleaner will leave your stone and tile looking shiny and new. This neutral, gentle cleaning formula is perfect for cleaning everyday messes. Spills, dirt, and pets are no match for the Stone \u0026amp; Tile Cleaner. Perfect for countertops and floors, or wherever else you may have stone and ceramic tile. It is suitable to use on natural stone such as marble, granite, limestone, travertine, slate, sandstone, and Zodiaq, as well as on ceramic tile, porcelain tile, and grout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Be sure surfaces to be cleaned are swept or vacuumed to remove loose debris. Avoid skin and eye contact with product. Wear protective eyewear and gloves when handling concentrate. Keep children and pets out of the area during application and drying.\u003c\/p\u003e\n\u003cp\u003eDilute concentrated cleaner with warm water according to the following mixing chart:\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"Mixing Chart\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1683\/4765\/files\/mixing_chart_grande.jpg?v=1493753215\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eOne gallon of concentrate makes up to 64 gallons of cleaning solution.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply mixed solution with a damp mop, sponge or appropriate professional cleaning equipment.\u003c\/li\u003e\n\u003cli\u003eClean entire area with mop, changing mop water often to ensure that soil is not redeposited. Wipe or rinse cleaned area.\u003c\/li\u003e\n\u003cli\u003eLet area dry completely before using.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart Concentrate - Up to 7,500 square feet per gallon. One quart makes 16 gallons.\u003c\/p\u003e"}
StoneTech® Professional Stone & Tile Cleaner

StoneTech® Professional Stone & Tile Cleaner

$10.47

StoneTech® Professional Stone & Tile Cleaner will leave your stone and tile looking shiny and new. This neutral, gentle cleaning formula is perfect for cleaning everyday messes. Spills, dirt, and pets are no match for the Stone & Tile Cleaner. Perfect for countertops and floors, or wherever else you may have stone and ceramic tile. It is...


More Info
{"id":1181130489898,"title":"DuPont™ StoneTech® Professional Grout Sealer","handle":"dupont™-stonetech®-professional-grout-sealer","description":"\u003cp\u003eDuPont™ StoneTech® Professional Grout Sealer offers heavy duty protection against most stains. Its main function is to protect grout and make cleaning easier, which it does very effectively. DuPont Grout Sealer will help preserve the natural look of your natural stone and ceramic and porcelain tile. This Grout Sealer is water based, and can be used in both interior and exterior applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Directions may vary depending on size. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings. Ensure that the surface temperature of the stone is between 50-80°F before sealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eLiberally apply using a paint pad, low-pressure chemical-resistant sprayer, narrow roller or natural hairbrush, focusing on the grout joints.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to completely penetrate into the grout, 5-15 minutes.\u003c\/li\u003e\n\u003cli\u003eLiberally apply a second coat following steps 2-3.\u003c\/li\u003e\n\u003cli\u003eWipe up all sealer from the surface of the tile. Use a clean, dry, lint-free, cotton towel or mop to remove excess sealer.\u003c\/li\u003e\n\u003cli\u003eIf sealer was not completely wiped off and a residue appears, wipe entire surface with a towel dampened with sealer. Use a white nylon pad to loosen residue and follow with a clean, white absorbent towel to remove.\u003c\/li\u003e\n\u003cli\u003eA full cure is achieved after 24-48 hours; foot traffic may begin in 4 hours. Cover with red rosin paper, if foot traffic must resume before the recommended time periods have passed.\u003c\/li\u003e\n\u003cli\u003eClean equipment with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 250 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterior Surfaces - 3-5 years\u003c\/p\u003e\n\u003cp\u003eExterior Surfaces - 1-3 years\u003c\/p\u003e","published_at":"2018-02-23T13:20:14-06:00","created_at":"2018-02-06T12:51:06-06:00","vendor":"Laticrete","type":"Protect","tags":["Protect"],"price":1629,"price_min":1629,"price_max":1629,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12671362760746,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAT-HD-GROUT-QT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191810687018,"product_id":1181130489898,"position":1,"created_at":"2018-02-06T12:51:06-06:00","updated_at":"2018-04-12T14:13:23-05:00","alt":null,"width":600,"height":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/groutsealQT.jpg?v=1523560403","variant_ids":[12671362760746]},"available":true,"name":"DuPont™ StoneTech® Professional Grout Sealer","public_title":null,"options":["Default Title"],"price":1629,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/groutsealQT.jpg?v=1523560403"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/groutsealQT.jpg?v=1523560403","options":["Title"],"content":"\u003cp\u003eDuPont™ StoneTech® Professional Grout Sealer offers heavy duty protection against most stains. Its main function is to protect grout and make cleaning easier, which it does very effectively. DuPont Grout Sealer will help preserve the natural look of your natural stone and ceramic and porcelain tile. This Grout Sealer is water based, and can be used in both interior and exterior applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Directions may vary depending on size. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings. Ensure that the surface temperature of the stone is between 50-80°F before sealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eLiberally apply using a paint pad, low-pressure chemical-resistant sprayer, narrow roller or natural hairbrush, focusing on the grout joints.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to completely penetrate into the grout, 5-15 minutes.\u003c\/li\u003e\n\u003cli\u003eLiberally apply a second coat following steps 2-3.\u003c\/li\u003e\n\u003cli\u003eWipe up all sealer from the surface of the tile. Use a clean, dry, lint-free, cotton towel or mop to remove excess sealer.\u003c\/li\u003e\n\u003cli\u003eIf sealer was not completely wiped off and a residue appears, wipe entire surface with a towel dampened with sealer. Use a white nylon pad to loosen residue and follow with a clean, white absorbent towel to remove.\u003c\/li\u003e\n\u003cli\u003eA full cure is achieved after 24-48 hours; foot traffic may begin in 4 hours. Cover with red rosin paper, if foot traffic must resume before the recommended time periods have passed.\u003c\/li\u003e\n\u003cli\u003eClean equipment with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 250 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterior Surfaces - 3-5 years\u003c\/p\u003e\n\u003cp\u003eExterior Surfaces - 1-3 years\u003c\/p\u003e"}
DuPont™ StoneTech® Professional Grout Sealer

DuPont™ StoneTech® Professional Grout Sealer

$16.29

DuPont™ StoneTech® Professional Grout Sealer offers heavy duty protection against most stains. Its main function is to protect grout and make cleaning easier, which it does very effectively. DuPont Grout Sealer will help preserve the natural look of your natural stone and ceramic and porcelain tile. This Grout Sealer is water based, and can be u...


More Info
{"id":1181130620970,"title":"StoneTech® Professional BulletProof® Sealer","handle":"stonetech-professional-bulletproof-sealer","description":"\u003cp\u003eStoneTech® Professional BulletProof® Sealer is a brand new, advanced formula that bonds with stone for improved wear resistance. It also features an advanced penetrating microbond that will help protect your stone and tile against tough oil and water-based stains. BulletProof® Sealer makes cleaning stone easy and helps preserve the natural look of your stone and tile. BulletProof® Sealer can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, flagstone, travertine, and sandstone, in both interior and exterior applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces 1 hour after standing water is removed. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask any surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eApply sealer evenly and liberally using a paint pad, roller or brush. Do not apply product with a sprayer. Avoid applying sealer on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to penetrate surface for 15–30 minutes while spreading excess sealer over entire area for even penetration. Remove excess sealer by wiping surface thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eApply second coat as needed for porous, absorbent surfaces 30–40 minutes after first coat, following directions in steps 2–3.\u003c\/li\u003e\n\u003cli\u003e15–30 minutes after final application, wipe entire surface with clean, dry towels to remove any excess sealer. To remove any residue, reapply a thin coat of sealer, wait 2–3 minutes, then rub lightly with a white nylon pad. Wipe again thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eA full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved.\u003c\/li\u003e\n\u003cli\u003eClean tools used during application with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePint - Up to 50 square feet\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 100 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterior Surfaces - 3-5 years\u003c\/p\u003e\n\u003cp\u003eExterior Surfaces - 1-3 years\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional BulletProof® Sealer you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-02-23T13:09:34-06:00","created_at":"2018-02-06T12:51:10-06:00","vendor":"Laticrete","type":"Protect","tags":["Protect"],"price":3320,"price_min":3320,"price_max":5200,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12929176469546,"title":"Pint Bottle","option1":"Pint Bottle","option2":null,"option3":null,"sku":"LAT-BULLET-PT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191811244074,"product_id":1181130620970,"position":1,"created_at":"2018-02-06T12:51:10-06:00","updated_at":"2018-02-06T12:51:10-06:00","alt":null,"width":1440,"height":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/ST_Bulletproof_Pin.jpg?v=1517943070","variant_ids":[12929176469546]},"available":true,"name":"StoneTech® Professional BulletProof® Sealer - Pint Bottle","public_title":"Pint Bottle","options":["Pint Bottle"],"price":3320,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""},{"id":11331022585898,"title":"Quart Bottle","option1":"Quart Bottle","option2":null,"option3":null,"sku":"LAT-BULLET-QT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191811276842,"product_id":1181130620970,"position":2,"created_at":"2018-02-06T12:51:10-06:00","updated_at":"2018-02-06T12:51:10-06:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/NEWbulletQT-500.jpg?v=1517943070","variant_ids":[11331022585898]},"available":true,"name":"StoneTech® Professional BulletProof® Sealer - Quart Bottle","public_title":"Quart Bottle","options":["Quart Bottle"],"price":5200,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/ST_Bulletproof_Pin.jpg?v=1517943070","\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/NEWbulletQT-500.jpg?v=1517943070"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/ST_Bulletproof_Pin.jpg?v=1517943070","options":["Size"],"content":"\u003cp\u003eStoneTech® Professional BulletProof® Sealer is a brand new, advanced formula that bonds with stone for improved wear resistance. It also features an advanced penetrating microbond that will help protect your stone and tile against tough oil and water-based stains. BulletProof® Sealer makes cleaning stone easy and helps preserve the natural look of your stone and tile. BulletProof® Sealer can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, flagstone, travertine, and sandstone, in both interior and exterior applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces 1 hour after standing water is removed. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask any surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eApply sealer evenly and liberally using a paint pad, roller or brush. Do not apply product with a sprayer. Avoid applying sealer on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to penetrate surface for 15–30 minutes while spreading excess sealer over entire area for even penetration. Remove excess sealer by wiping surface thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eApply second coat as needed for porous, absorbent surfaces 30–40 minutes after first coat, following directions in steps 2–3.\u003c\/li\u003e\n\u003cli\u003e15–30 minutes after final application, wipe entire surface with clean, dry towels to remove any excess sealer. To remove any residue, reapply a thin coat of sealer, wait 2–3 minutes, then rub lightly with a white nylon pad. Wipe again thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eA full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved.\u003c\/li\u003e\n\u003cli\u003eClean tools used during application with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePint - Up to 50 square feet\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 100 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterior Surfaces - 3-5 years\u003c\/p\u003e\n\u003cp\u003eExterior Surfaces - 1-3 years\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional BulletProof® Sealer you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e"}
StoneTech® Professional BulletProof® Sealer

StoneTech® Professional BulletProof® Sealer

$33.20

StoneTech® Professional BulletProof® Sealer is a brand new, advanced formula that bonds with stone for improved wear resistance. It also features an advanced penetrating microbond that will help protect your stone and tile against tough oil and water-based stains. BulletProof® Sealer makes cleaning stone easy and helps preserve the natural look ...


More Info
{"id":1181130752042,"title":"StoneTech® Professional Heavy Duty Sealer","handle":"stonetech®-professional-heavy-duty-sealer","description":"\u003cp\u003eStoneTech® Professional Heavy Duty Sealer features an advanced penetrating microbond and provides heavy duty protection against most stains. This sealer makes cleaning stone easy and helps preserve the natural look of your stone. It is water-based, and can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, flagstone, travertine, and sandstone, in both interior and exterior applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces 1 hour after standing water is removed. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask any surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eApply sealer evenly and liberally using a paint pad, roller or brush. Do not apply product with a sprayer. Avoid applying sealer on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to penetrate surface for 15–30 minutes while spreading excess sealer over entire area for even penetration. Remove excess sealer by wiping surface thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eApply second coat as needed for porous, absorbent surfaces 30–40 minutes after first coat, following directions in steps 2–3.\u003c\/li\u003e\n\u003cli\u003e15–30 minutes after final application, wipe entire surface with clean, dry towels to remove any excess sealer. To remove any residue, reapply a thin coat of sealer, wait 2–3 minutes, then rub lightly with a white nylon pad. Wipe again thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eA full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved.\u003c\/li\u003e\n\u003cli\u003eClean tools used during application with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePint - Up to 50 square feet\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 100 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterior Surfaces - 3-5 years\u003c\/p\u003e\n\u003cp\u003eExterior Surfaces - 1-3 years\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional Heavy Duty Sealer you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-02-23T13:01:58-06:00","created_at":"2018-02-06T12:51:12-06:00","vendor":"Laticrete","type":"Protect","tags":["Protect"],"price":2234,"price_min":2234,"price_max":3427,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11331022913578,"title":"Pint Bottle","option1":"Pint Bottle","option2":null,"option3":null,"sku":"LAT-HVY-DTY-SEALER-PT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191811702826,"product_id":1181130752042,"position":1,"created_at":"2018-02-06T12:51:13-06:00","updated_at":"2018-02-06T12:51:13-06:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_PT.jpg?v=1517943073","variant_ids":[11331022913578]},"available":true,"name":"StoneTech® Professional Heavy Duty Sealer - Pint Bottle","public_title":"Pint Bottle","options":["Pint Bottle"],"price":2234,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null},{"id":12929188888618,"title":"Quart Bottle","option1":"Quart Bottle","option2":null,"option3":null,"sku":"LAT-HVY-DTY-SEALER-QT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191811735594,"product_id":1181130752042,"position":2,"created_at":"2018-02-06T12:51:13-06:00","updated_at":"2018-02-06T12:51:13-06:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_QT.jpg?v=1517943073","variant_ids":[12929188888618]},"available":true,"name":"StoneTech® Professional Heavy Duty Sealer - Quart Bottle","public_title":"Quart Bottle","options":["Quart Bottle"],"price":3427,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_PT.jpg?v=1517943073","\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_QT.jpg?v=1517943073"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_PT.jpg?v=1517943073","options":["Size"],"content":"\u003cp\u003eStoneTech® Professional Heavy Duty Sealer features an advanced penetrating microbond and provides heavy duty protection against most stains. This sealer makes cleaning stone easy and helps preserve the natural look of your stone. It is water-based, and can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, flagstone, travertine, and sandstone, in both interior and exterior applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces 1 hour after standing water is removed. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask any surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eApply sealer evenly and liberally using a paint pad, roller or brush. Do not apply product with a sprayer. Avoid applying sealer on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to penetrate surface for 15–30 minutes while spreading excess sealer over entire area for even penetration. Remove excess sealer by wiping surface thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eApply second coat as needed for porous, absorbent surfaces 30–40 minutes after first coat, following directions in steps 2–3.\u003c\/li\u003e\n\u003cli\u003e15–30 minutes after final application, wipe entire surface with clean, dry towels to remove any excess sealer. To remove any residue, reapply a thin coat of sealer, wait 2–3 minutes, then rub lightly with a white nylon pad. Wipe again thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eA full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved.\u003c\/li\u003e\n\u003cli\u003eClean tools used during application with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePint - Up to 50 square feet\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 100 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterior Surfaces - 3-5 years\u003c\/p\u003e\n\u003cp\u003eExterior Surfaces - 1-3 years\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional Heavy Duty Sealer you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e"}
StoneTech® Professional Heavy Duty Sealer

StoneTech® Professional Heavy Duty Sealer

$22.34

StoneTech® Professional Heavy Duty Sealer features an advanced penetrating microbond and provides heavy duty protection against most stains. This sealer makes cleaning stone easy and helps preserve the natural look of your stone. It is water-based, and can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, f...


More Info