Free Shipping on Orders Over $500

{"id":1181130752042,"title":"StoneTech® Professional Heavy Duty Sealer","handle":"stonetech®-professional-heavy-duty-sealer","description":"\u003cp\u003eStoneTech® Professional Heavy Duty Sealer features an advanced penetrating microbond and provides heavy duty protection against most stains. This sealer makes cleaning stone easy and helps preserve the natural look of your stone. It is water-based, and can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, flagstone, travertine, and sandstone, in both interior and exterior applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces 1 hour after standing water is removed. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask any surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eApply sealer evenly and liberally using a paint pad, roller or brush. Do not apply product with a sprayer. Avoid applying sealer on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to penetrate surface for 15–30 minutes while spreading excess sealer over entire area for even penetration. Remove excess sealer by wiping surface thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eApply second coat as needed for porous, absorbent surfaces 30–40 minutes after first coat, following directions in steps 2–3.\u003c\/li\u003e\n\u003cli\u003e15–30 minutes after final application, wipe entire surface with clean, dry towels to remove any excess sealer. To remove any residue, reapply a thin coat of sealer, wait 2–3 minutes, then rub lightly with a white nylon pad. Wipe again thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eA full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved.\u003c\/li\u003e\n\u003cli\u003eClean tools used during application with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePint - Up to 50 square feet\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 100 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterior Surfaces - 3-5 years\u003c\/p\u003e\n\u003cp\u003eExterior Surfaces - 1-3 years\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional Heavy Duty Sealer you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-02-23T13:01:58-06:00","created_at":"2018-02-06T12:51:12-06:00","vendor":"Laticrete","type":"Protect","tags":["Protect"],"price":2234,"price_min":2234,"price_max":3427,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11331022913578,"title":"Pint Bottle","option1":"Pint Bottle","option2":null,"option3":null,"sku":"LAT-HVY-DTY-SEALER-PT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191811702826,"product_id":1181130752042,"position":1,"created_at":"2018-02-06T12:51:13-06:00","updated_at":"2018-02-06T12:51:13-06:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_PT.jpg?v=1517943073","variant_ids":[11331022913578]},"available":true,"name":"StoneTech® Professional Heavy Duty Sealer - Pint Bottle","public_title":"Pint Bottle","options":["Pint Bottle"],"price":2234,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":null},{"id":12929188888618,"title":"Quart Bottle","option1":"Quart Bottle","option2":null,"option3":null,"sku":"LAT-HVY-DTY-SEALER-QT","requires_shipping":true,"taxable":true,"featured_image":{"id":3191811735594,"product_id":1181130752042,"position":2,"created_at":"2018-02-06T12:51:13-06:00","updated_at":"2018-02-06T12:51:13-06:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_QT.jpg?v=1517943073","variant_ids":[12929188888618]},"available":true,"name":"StoneTech® Professional Heavy Duty Sealer - Quart Bottle","public_title":"Quart Bottle","options":["Quart Bottle"],"price":3427,"weight":454,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_PT.jpg?v=1517943073","\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_QT.jpg?v=1517943073"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2779\/9676\/products\/HD_Sealer_PT.jpg?v=1517943073","options":["Size"],"content":"\u003cp\u003eStoneTech® Professional Heavy Duty Sealer features an advanced penetrating microbond and provides heavy duty protection against most stains. This sealer makes cleaning stone easy and helps preserve the natural look of your stone. It is water-based, and can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, flagstone, travertine, and sandstone, in both interior and exterior applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces 1 hour after standing water is removed. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMask any surfaces not intended to be treated.\u003c\/li\u003e\n\u003cli\u003eApply sealer evenly and liberally using a paint pad, roller or brush. Do not apply product with a sprayer. Avoid applying sealer on unintended surfaces.\u003c\/li\u003e\n\u003cli\u003eAllow sealer to penetrate surface for 15–30 minutes while spreading excess sealer over entire area for even penetration. Remove excess sealer by wiping surface thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eApply second coat as needed for porous, absorbent surfaces 30–40 minutes after first coat, following directions in steps 2–3.\u003c\/li\u003e\n\u003cli\u003e15–30 minutes after final application, wipe entire surface with clean, dry towels to remove any excess sealer. To remove any residue, reapply a thin coat of sealer, wait 2–3 minutes, then rub lightly with a white nylon pad. Wipe again thoroughly with clean, dry towels.\u003c\/li\u003e\n\u003cli\u003eA full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved.\u003c\/li\u003e\n\u003cli\u003eClean tools used during application with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePint - Up to 50 square feet\u003c\/p\u003e\n\u003cp\u003eQuart - Up to 100 square feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpected Wear: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterior Surfaces - 3-5 years\u003c\/p\u003e\n\u003cp\u003eExterior Surfaces - 1-3 years\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease select the size of the StoneTech® Professional Heavy Duty Sealer you would like from the drop down menu below.\u003c\/span\u003e\u003c\/p\u003e"}

StoneTech® Professional Heavy Duty Sealer

Product Description

StoneTech® Professional Heavy Duty Sealer features an advanced penetrating microbond and provides heavy duty protection against most stains. This sealer makes cleaning stone easy and helps preserve the natural look of your stone. It is water-based, and can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, flagstone, travertine, and sandstone, in both interior and exterior applications.

Directions:

Read entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces 1 hour after standing water is removed. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.

Application:

  1. Mask any surfaces not intended to be treated.
  2. Apply sealer evenly and liberally using a paint pad, roller or brush. Do not apply product with a sprayer. Avoid applying sealer on unintended surfaces.
  3. Allow sealer to penetrate surface for 15–30 minutes while spreading excess sealer over entire area for even penetration. Remove excess sealer by wiping surface thoroughly with clean, dry towels.
  4. Apply second coat as needed for porous, absorbent surfaces 30–40 minutes after first coat, following directions in steps 2–3.
  5. 15–30 minutes after final application, wipe entire surface with clean, dry towels to remove any excess sealer. To remove any residue, reapply a thin coat of sealer, wait 2–3 minutes, then rub lightly with a white nylon pad. Wipe again thoroughly with clean, dry towels.
  6. A full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved.
  7. Clean tools used during application with water.

Coverage:

Pint - Up to 50 square feet

Quart - Up to 100 square feet

Expected Wear:

Interior Surfaces - 3-5 years

Exterior Surfaces - 1-3 years

Please select the size of the StoneTech® Professional Heavy Duty Sealer you would like from the drop down menu below.

$22.34
Maximum quantity available reached.